13
electrophoresis without terminating the operation.
, the LED is
flashing. Press
Key to restart the run.
10. Press the
Key again to stop electrophoresis.
11. When the run is completed, operation stops with alarm and
is shown on the screen. Press
Key to terminate a timed run, and
turn the AC power OFF by the switch on the rear.
12. To change limits of electrophoresis in progress
If you need to make changes to the current running limits, you must stop
electrophoresis by pressing the
Key. Press
Key to enter the
setting screen,
. Enter the changes and then press
Key once again to restart your operation.
Note:
After stopping and restarting an operation, the timer resets to selected
time and does not take into account the time that electrophoresis was in
progress before it was stopped.
