12
4. Turn on the power switch. The
version and model name
will appear on the screen.
5. Use
Key and
Key to select
, and then press
the
Key or
to enter the next screen:
.
6. Use
,
,
, or
to move cursor to the parameters such
as voltage (V) or current (mA) or power (W) or time (Min.). Press the
key to set the specified parameter.
7. Use
or
to set the appropriate value, and then press
.
Move to the next parameter until all the parameters are set in the same
operation method.
8. Press
Key to start electrophoresis.
the LED will light up,
and the screen will show the real time parameter values,
.
Press
or
to see the following screen,
. Press
or
to go back to
9. Press
Key to temporarily interrupt the power to the ongoing
