MRC MCX-5000 Series, Руководство пользователя

Страница: 27 / 220

MARINE RADIO CO.,LTD.
주
/
선박무선
Subject : Auto Exchanger Page : (26 / 46)
Date : 2010.10.13 Doc. : MCX-5000S_ENG_R1
(QAS-ADD-008/1/10.10.13) manual\pabx\mcx-5000S\MCX-5000S_eng.doc
( MARINE RADIO CO., LTD.) MRC
1.9 Wake up Call
Morning Call Registration
*. Tel No. : 17 --> only one time available
*. Tel No. : 18 --> designated time at every day
Ex) To set a morning call at AM 07:10
1) If you press "17" or "18", the dial tone is heard again.
2) If you press "0", "7", "1", and “0" in order, the melody is heard for 10 seconds to notify that input is
completed.
3) When you hang up, the morning call setup is completed.
4) The above setup (17, 18) is effective to only one telephone respectively.
Morning Call Operation
1) If the registered time is reached, the telephone bell rings quickly and differs from the general bell.
2) If you pick up the phone, the bell is stopped and melody is heard. When you hang up, the morning
call is completed.
3) If you do not pick up the phone for other reasons, the bell rings for 30 seconds and waits for 5
minutes. After 5 minutes, the bell rings for 30 seconds again and is completely released.
4) During morning call waiting, if another call is incoming or you use the phone, the morning call is
released as well.
Morning Call Cancellation
1) If you cancel morning call, press "17" or "18". And then, the dial tone is heard.
2) If you press "*" or "#", the melody is heard. Then, morning call is released.
3) When you put the handset in place, then morning call is completely cancelled.
1.10 Group Call (option)
* You can assign 10 Group and 10 Telephone per 1 Group.
1) The handset hold, then start the dialing to group number(1
∼
6).
2) The system will be call ring simultaneously to registered party.
3) When there is first holding party among the group, then the ring call is stopped, they can talk about
each other.
1.11 Self Ring Test
A user of an extension can confirm simply function of his telephone handset.
1) Hold on the handset and can confirm dial tone.
2) Start the dialing to self number, then you can receive melody. That is normal condition of his line.
3) The handset holds down, then ring signal is received, that is normal condition of the line.
4) 1.0sec On/0.5sec off: 8 times
5) You can finish the test by the handset hold on and off.
1.12 Warning Signal (Main Unit)
If the telephone set of an extension is placed incorrectly or leave alone for a long time, alarm buzzer
appears and displayed the phone number at the Digital-phone. In this case, you must be push the switch
"BZ STOP", so buzzer bell is disappeared and must be normal condition the telephone handset. In case of
alarm buzzer appears
1) Excess the 45 second time limit: Nothing to do with holding handset.
2) Excess the 45 second time limit: Nothing to do with holding handset after using.
3) Excess the 30 second time limit: Nothing to make a response with holding handset after calling to the
other.