LCEN-401P
7
Figure 7-1 Operation panel
Item
Symbol
Name
Function
1
Program button
Press the button to choose the programs
2
Step button
Press for step choose and hold on 5s for RCF switch display
3
Open/ lock button
Press the button to open the door The button is not available
when the centrifuge is running.
4
Start/ Stop button
Press the button to start running. The centrifuge will brake to
stop running if pressed during centrifugation.
5
Parameter knob
Clockwise rotate to increase program values. Rotate
anti-clockwise to decrease parameter values.
Press the button 5s, change the preloaded program
parameters.
Figure 7-2 The main interface
Main interface is as figure 7-2. The program is for PRP function. The speed is set to be 3480rpm, the door
lock is released and the running time is 3 minutes. When speed symbol
is rotating, this indicates the
centrifuge is running. If the rotation is faster, the speed is higher. Time symbol
displays the time
setting.
8. Rotor Preparation
8.1 Prepare the samples
8.2 Inject the samples into tubes
Program
Speed area Lock status Time area
