or pathogenic materials, clean it according to the decontamination procedures specified.
⚫
If you require service at site, please sterilize and decontaminate the centrifuge in advance, and then
notify the service center about the details of the materials and procedure.
⚫
For safety purposes not enter within 30cm around this centrifuge when it is in operation.
⚫
To avoid electrical shocks, ensure your hands are dry before handling the power cord or turning On/Off
the power switch.
⚫
For safety purposes do not enter within 30cm around this centrifuge in operation mode.
⚫
Don’t open the centrifuge lid while the rotor is in operation.
⚫
Unauthorized repairs, disassembly, or modifying the centrifuge except by our service center are
strictly prohibited.
Caution
•
Ensure this centrifuge is placed on a solid, flat and firm table.
•
Ensure that the centrifuge is on flat level table before operation.
•
Ensure that the angle between the housing and upper lid is larger than the 70 degrees while opening
the lid.
•
Do not put your fingers or hands in-between the housing and upper lid while closing the lid.
•
Do not move/ relocate the centrifuges/ lean against it when the centrifuge is in operation.
•
If there is any liquid spillage in the rotor chamber, please promptly clean and dry with a dry cloth to
avoid sample contamination.
•
Keep the centrifugal chamber clean and ensure to remove a n y f o r e i g n p a r t i c l e s d r o p p e d
i n s i d e t h e r o t o r c h a m b e r, before running the centrifuge.
•
Cautions about rotor
(1) Check the rotor surface for corrosion or damage before use and do not use it if any problem is
found.
(2) Do not set the speed beyond the allowable minimum speed of the rotor (rotor and adapters). Make
sure to run it below the maximum speed.
(2) Do not exceed the allowable imbalance.
