. Fig. 8-1 Startup interface of centrifuge
.The centrifuge shows the centrifuge model
HCEN-24
, as shown in Fig. 8-2
Fig. 8-2 Model
HCEN-24
interface
The centrifuge displays the last operating parameters, as shown in Fig. 8-3.
Fig. 8-3 Last operation interface
⚫
Speed setting: 12000 rpm. Time setting 60minutes
⚫
The upper lid is closed.
8.1.1 Rotor installation and replacement
Mount the rotor on the main shaft
Tighten the rotor lid
Mount the rotor
cover. Fig. 8-4 Rotor Installation
HEL
LO
X 100g
X 100rpm
Sec/
min
12
24
120
x 100rpm
60
min
