MRC Fuego SCS basic, Руководство по эксплуатации

Страница: 14 / 14

Göttingen, 18.05.2005
B.Wartewig
Geschäftsführer
Manufacturer
Declaration of Conformity
Following the Directives 89/336/EWG (EEC), 73/23/EWG (EEC) and with the Radio and
Telecommunications Terminal Equipment Act (FTEG) and Directive 1999/5/EC (R&TTE Directive)
The Company
05&
declares that
the electronic radio frequency laboratory gas burner
(radio equipment, equipment class 1, Non-specific SRD)
Fuego SCS basic RF Typ / type 8.001.000-RF
is in conformity with the relevant provisions of the following standards and complies with the essential requirements of §3 and
the other relevant provisions of the FTEG (Article 3 of the R&TTEDirective), when used for its intended purpose. (with the
normative document A1 mains connection)
1. Electromagnetic Compatibility Directive
1.1 EN 61326-1 A1/A2/A3 Electrical equipment for measurement, control and laboratory use, EMC
requirements
Generic Emission Standard: Electrical Equipment, class B, table 4
Generic Immunity Standard: Industrial areas, continuous, unmonitored
operation
1.2 EN 61000-3-2:2000 Limits for harmonic current emissions, class A
1.3 Protection requirements concerning electromagnetic compatibility § 3(1)(2), (Article 3(1)(b))
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services
EN 301 489-3 Part 3 : specific conditions for short-range devices (SRD) operating on frequencies
between 9kHz and 40 GHz
2. Security of electrical resources
(Health and safety requirements pursuant to § 3 (1) 1. (Article 3(1) (a)))
2.1 EN 61010 Safety requirements for electrical equipment for measurement, control, and laboratory use
Part 1: General requirement
3. Air interface of the radio systems pursuant to § 3(2) (Articel 3(2))
Electromagnetic compatibility and Radio spectrum Matters(ERM) - Short range devices;
Radio equipment to be used in the 1GHz to 40GHz freq. range
EN 300 440 - 1 Part 1: Technical characteristics and test methods
EN 300 440 - 2 Part 2: Harmonized EN under article 3.2 of the R&TTE Directive