MRC CC-423, Инструкции по эксплуатации

Страница: 8 / 12

4. SOURCE PROVIDE PROCEDURE
4-1. CURRENT SOURCE PROVIDE PROCEDURE
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure Button " ( 3-8, Fig. 1 ) select to SOURCE
Model .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to Current Function.
4) Press the " ► button "( 3-4, Fig. 1 )or " ◄ button"( 3-2, Fig. 1 ) select
a digit for adjustment. The blinking digit identifies the digit selected.
5) Press the "
▼
button "( 3-6, Fig. 1 ) or "
▲
button "( 3-5, Fig. 1 ) to adjust
the value of the digit. Press and Hold the
▼
or
▲
button to rapidly adjust
the value. And will generate the current output same as the display value.
Remark :
The " Red Alligator clip " ( 3-19, Fig. 1 ) is for the positive
current output. The " Black Alligator clip " ( 3-20, Fig. 1 ) is
the " ground " for current output.
4-2. VOLTAGE SOURCE PROVIDE PROCEDURE
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure Button " ( 3-8, Fig. 1 ) select to SOURCE
Function .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to voltage Function.
4) Press the " ► button "( 3-4, Fig. 1 )or " ◄ button"( 3-2, Fig. 1 ) select
a digit for adjustment. The blinking digit identifies the digit selected.
5)
Press the "
▼
button "( 3-6, Fig. 1 ) or "
▲
button "( 3-5, Fig. 1 ) to adjust the
value of the digit. Press and Hold the
▼
or
▲
button to rapidly adjust the
value. And will generate the voltage output same as the display value.
6