6. ADVANCED SETTING
Under do not execute the Datalogger function, press the " Function
Button " ( 3-7, Fig. 1 ) continuously at least 3 seconds will enter the "
Advanced Setting " mode. Then press the " Function Button "
(3-7, Fig. 1 ) once a while in sequence to select the two main function,
the lower display will show :
POFF.......
Auto power OFF management
t-CF.......
Select the Temp. unit to
℃
or
℉
Remark :
During execute the " Advanced Setting " function, if press
" POWER Button " ( 3-3, Fig. 1 ) once will exit the " Advanced
Setting " function, the LCD will return to normal screen.
6-1 Auto power OFF management
When the lower display show " PoFF "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "( 3-6, Fig. 1 )
to select the upper value to " yES " or " no ".
yES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2) After select the upper text to " yES " or " no ", press the " Source/Measure
Button " ( 3-8, Fig. 1 ) will save the setting function with default.
6-2 Select the Temp. unit to
℃
or
℉
When the lower display show " t-CF "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button " ( 3-6, Fig. 1 )
to select the upper Display text to "
℃
" or "
℉
".
C - Temperature unit is
℃
F - Temperature unit is
℉
2) After Display unit is selected to "
℃
" or "
℉
", press the " Source/Measure
Button " ( 3-8, Fig. 1 ) will save the setting function with default.
9
