Fig. 2
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure Button " ( 3-8, Fig. 1 ) select to
Measure Model .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to Power/mA
Measure Function.
4) Open the circuit in which current connect is to be measured and connect
the " Red Alligator clip " ( 3-19, Fig. 1 ) and " Black Alligator clip "
( 3-20, Fig. 1 ) securely in series with the load in which the current is be
measured .
Note:
a. The " Red Alligator clip " ( 3-19, Fig. 1 ) is for the positive current
measurement input .
The " Black Alligator clip " ( 3-20, Fig. 1 ) is for the negative current
measurement input .
b. The measuring procedures & principal are same as the 5-1 Current
measurement except the meter build in the DC 12 V power source
in serial with the current meter ,please refer Fig. 2 .
5-3. Type k MEASURE PROCEDURE
1) Power on the meter by press the " Power button " ( 3-3,Fig. 1 ) > 2 sec.
2) Press the " Source/Measure Button " ( 3-8, Fig. 1 ) select to
MEASURE Model .
3) Press the " FUNCTION button " ( 3-7, Fig. 1 ) select to Type k Measure
Function.
4) The Type k Temp. probe into the " Type k Temp. socket " ( 3-16, Fig. 1 ) .
5) The meter LCD display will show the measure value same as the input
Type k temp. value.
Remark : The Type k temp. input Max. 1370
℃
.
8
