manualshive.com logo in svg

MR MControl 10, Руководство по эксплуатации

Поделиться
Скачать
MR MControl 10 Скачать руководство пользователя страница 48

8 Operation

48

5809776/02 EN

NOTICE

Damage to the file system!

The file system can become damaged due to an incorrect data transmis-
sion process. A damaged file system can lead to the device no longer be-
ing functional.

► Do not disconnect the device from the power supply during the import.

► During the import, do not remove the USB stick or disconnect the net-

work connection.

Importing a system image or system settings from a USB stick

To import a system image or system settings from a USB stick, proceed as
follows:

ü

Ensure that the USB stick is formatted with the FAT32 file system.

1. Connect the USB stick to the USB port on the device.

2. Call up the configuration menu.

3. Select the menu 

Import & Export

.

4. Select 

Import system image

 or 

Import system settings

.

5. Select the desired 

file

 and confirm with 

OK

.

ð

The system image or system settings are imported.

ð

Restart the device to complete the import procedure.

Exporting system settings to a USB stick

To export system settings to a USB stick, proceed as follows:

ü

Ensure that the USB stick is formatted with the FAT32 file system.

1. Connect the USB stick to the USB port on the device.

2. Call up the configuration menu.

3. Select the menu 

Import & Export

.

4. Select 

Export system settings

.

ð

The system settings will be exported.

Содержание MControl 10































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды