22
mr.steam
®
Installation, Operation & Maintenance Manual
__________________________________________________________________________
H O M E O W N E R
S E C T I O N
As you follow these instructions, you will notice warning and caution symbols. This blocked information is important for the safe and efficient
installation and operation of this steam bath system. These are types of potential hazards that may occur during installation and operation:
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided may result in minor or moderate injury or product damage.
This highlights information that is especially relevant to a problem-free installation.
All information in these instructions is based on the latest product information available at the time of publication. Sussman-Automatic Corporation
reserves the right to make changes at any time without notice. More current instructions may be available at www.mrsteam.com.
IMPORTANT SAFETY INFORMATION
Applies to 1-17
1. Steam rooms contain steam and elevated temperatures.
Please read and observe all warnings in this manual
before using a steam room.
2. Discontinue use of the steam generator and control if the
steam generator or control are damaged or otherwise
not functioning properly. Using damaged equipment may
result in an inoperative or hazardous installation
3. The MAX series of steam generators are for residential
use only. Commercial or other nonresidential applications
void the warranty and may adversely affect product
performance and may represent a safety hazard.
4. Read these instructions before installation, operation or
service.
5. Although the MAX steambath generators have been fully
qualified for shipment by MrSteam, the following must
be reviewed for proper, safe and enjoyable steam
bathing:
- Verify that the model and accessories specifications are
correct for the incoming line voltage.
- Ensure steambath generator has been correctly sized for
the steam room. Pay particular attention to room volume
and construction. If any questions, please refer to
MrSteam sizing and selection guide on page 6 or call
MrSteam.
6. Supervise children at all times.
7. Steam is hot and can cause injury or death if improperly
used.
8. Prolonged use of the steam system can raise excessively
the internal human body temperature and impair the
body’s ability to regulate its internal temperature (hyper-
thermia). Limit your use of steam to 10-15 minutes until
you are certain of your body’s reaction.
9. Excessive temperatures have a high potential for causing
fetal damage during the early months of pregnancy.
Pregnancy or possibly pregnant women should consult a
physician before using a steam bath.
10. Obese persons and persons with a history of heart dis-
ease, low or high blood pressure, circulatory system
problems, or diabetes should consult a physician before
using a steambath.
11. Persons using medication should consult a physician
before using a steambath since some medication may
induce drowsiness while other medications may affect
heart rate, blood pressure and circulation.
12. Electric shock hazard. MrSteam steam generators are
connected to high voltage and contain live electrical
components. All installation and service to be per-
formed by qualified and licensed electricians and
plumbers only. Installation or service by unqualified
persons or failure to use MrSteam parts may result in
property damage or in a personal injury.
13. If you are pregnant, have a coronary condition, are in
poor health, are being treated for any other medical
condition, or are using medication or drugs, MrSteam
recommends that you obtain the approval of a physi-
cian before use. For information about this product and
safety issues, call 1.800.76.STEAM.
14.
Do not install or use any iSteam
®
, AirTempo
®
, TempoPlus
®
,
iTempo
®
, HomeWizard
®
or iGenie
®
controls without read-
ing and understanding the Control Installation and
Operation Manual. Failure to read and understand these
instructions may result in an inoperative or hazardous
installation.
15. If an iSteam, AirTempo, iTempo or iTempo/Plus control is
installed outside the steam room a Remote Temperature
Probe (PN MSTS) must be installed inside the steam room
per installation instructions supplied with the Remote
Temperature Probe. Failure to use a Remote Temperature
Probe or failure to install according to instructions will
result in an inoperative control and overheating of the
steam room.
16. To prevent slip and fall hazards non-slip strips must be
installed on the steam room floor.
17. Do not alter or modify any MrSteam product. Doing so
may result in an inoperative or hazardous installation and
will void the warranty.