E-7
Forced Air Propane Construction Heater
Operating Instructions and Owner’s Manual
SIZE AND CAPACITY OF PROPANE
CYLINDERS REQUIRED
The charts below show the approximate size of the cylinder required
for these heaters. To use the chart:
1. Select the lowest air temperature expected (at the bottom of
the chart).
2. Move straight up to time of operation desired (left side of
chart).
3. Read the cylinder size required.
All heaters should have:
full cylinders
good air circulation
no frost on cylinders
WARRANTY
We are pleased that you have selected our product and take
this opportunity to assure you that qualified service facilities are
available if required. With the cooperation of independent dealers,
a nationwide network of authorized servicing dealers is available for
your servicing requirements.
Should your product require servicing, read the section of the
manual entitled “Servicing”.
Who gets the warranty? The warranty is limited to the consumer
who originally purchases the product.
What is covered? This limited warranty covers all imperfections in
workmanship and material.
What is not covered? This limited warranty does not cover
damage resulting from accident, misuse or abuse, lack of proper
maintenance, affixing of any attachments not provided with
the products, or loss of parts. IN NO EVENT SHALL Mr. Heater
TECHNICAL PRODUCTS BE LIABLE FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES NOR FOR ANY DAMAGES
RESULTING FROM MISUSE OR MODIFICATION OF THIS PRODUCT.
BTU'S PER HOUR REQUIRED
TIME (HRS.)
Wiring Diagram (MHQ38FA)
