6
Order online at www.mrbeer.com
1. Place washer on the spigot with the beveled (narrower) edge facing the threads
4
, then insert spigot into keg.
Place the nut with the wide flat side against the inside keg wall and gently hand tighten.
5
2. Fill the keg with water then let the keg sit for a few minutes to test for leaks.
3. Apply keg label to front of keg.
HOW TO
ASSEMBLE THE SPIGOT
2
4
The most common problem in assembling the tap is installing the washer backward, or inside the keg, which can cause
leakage.
5
Hand tighten only. Do not over tighten. Do not use pliers or a wrench as it will damage the assembly.
Spigot
Washer Keg Wall Nut
1. With the spigot handle facing up, slide the spigot into the fermenter hole until the clip snaps into place.
2. Fill the fermenter with water, then let it sit for a few minutes to test for leaks.
