MQ Multiquip MP115E, Руководство по эксплуатации и запасным частям

Страница: 25 / 90

MP1 SERIES MASONRY SAW • OPERATION AND PARTS MANUAL — REV. #2 (10/12/17) — PAGE 25
OPERATION
3. Adjust the cutting depth by pulling up or down on
the
Cutting Head Handle
(Figure 19). This saw is
designed, and is best utilized as a " Chop-Saw ". Once
the mounting plate release/lock lever is released, the
optimum cutting action is attained by using the
Raise/
Lower Handle
to rotate down onto the material to be
cut. Simultaneously the conveyor cart is moved slowly
forward to advance the material and cutting action.
A heavy-duty spring supports ergonomic return-to-
height action of the cutting head assembly.
Figure 19. Cutting Head Handle
4. Turn the power ON/OFF switch (Figure 20) to the ON
position with the blade away from the material to be
cut, the cutting blade should begin to rotate. Before
cutting remember to follow all safety rules referenced
in this manual.
DANGER
ALWAYS be alert to the fact that there is a rotating
blade on the saw and be extremely aware of your body
position — especially your hands in relationship to the
rotating blade. The possibility exists of severe bodily
harm or even death if your body comes in contact with
the rotating saw blade.
Figure 20. Power ON/OFF Switch (ON)
5. Push the conveyor cart with the material, slowly and
evenly until the cut is complete. Move the cart back
and remove the cut pieces.
6. Avoid overloading the motor when cutting. However,
the electric motors are protected with a manual-reset
thermal overload switch that will turn the saw off if
the motor is overheated. In the event that the switch
is tripped, turn the
"ON/OFF"
switch to the
"OFF"
position and allow the motor to cool before attempting
to restart.
SHUT DOWN PROCEDURE
1. Place the power ON/OFF switch (Figure 21) in the OFF
position (down).
Figure 21. Power ON/OFF Switch (OFF)
2. Wait for the cutting blade to stop rotating.
3. Disconnect the saw's AC power cord from the power
source. NEVER leave the saw connected to a power
source when unattended. This will prevent accidental
starting.
4. Using a soft cloth, clean any excess debris or residue
that may have accumulated on the saw.
5. Store saw in a clean dry location where it will be out
of the reach -of children.