MPM MSO-10M, Руководство пользователя

Страница: 14 / 36

14
GB
3
Put the top cover on the screen housing and snap it using the handles for closing the top cover.
Improper attachment of the top cover disables the device.
4
Slightly tilt the pulp container in the direction of the device and put it underneath the hole in the
juice bowl. Push the container to the device.
5
Connect the power cord to the mains. Before connecting make sure that the control switch is set to,,
0'' (OFF).
6 Wash fruits/vegetables, remove the seeds and thick/hard skin.
7
Place a juice container under the spout. Turn on the appliance. Set the appropriate operating speed
for the type of fruits/vegetables. To ensure a long service life, it is recommended that the appliance's
operating time does not exceed 60 seconds.
9
Place the fruits or vegetables in the opening in the top cover and gently push then in using the
pusher.
Too much pressure on the pusher may adversely affect the juicing process.
If during the juicing after some time bits of fruit appear in the outlet or the pulp container or if the
glass fills up with juice, turn off the appliance. The device should be cleaned before reuse.
Do not put your fingers or other objects into the juicer's opening.
10
After centrifugation of the juice, if juice does not come out from the outlet, turn off the device and
unplug the power cord. Remove the juice container from under the outlet after a complete stop of
the motor and rotations of the screen.
(It is recommended to consume fresh juices, immediately after preparation. Storing the juice for a
longer time affects its taste and nutrients.)
JUICING
1.
Thoroughly wash fruits and vegetables, which you will use to make juice.
2.
When juicing fruits such as grapes, quince, etc., clean the screen for best results
3
after each
0.5 kg of fruit.
3.
Place a juice container below the outflow hole
5
.
4.
Put the fruits and vegetables through the hole in the top cover
2
.