MPM MOD-36, Руководство пользователя

Страница: 19 / 40

19
EN
CLEANING AND MAINTENANCE
CAUTION! Never immerse the vacuum cleaner, the battery charger, the battery or the battery dock in water!
CAUTION! Empty the dust canister and clean the filters after each use for the best performance.
CAUTION! Maintain the vacuum cleaner powered off and disconnected from the battery charger!
1.
Clean the outer surfaces of the vacuum cleaner with a damp cloth and wipe them dry. Use a
bit of a neutral detergent to remove persistent dirt.
2.
Clean the mesh filter (12) and the motor filter (11) of dust with a fine brush. You can also wash
them under running water, but dry them thoroughly before reassembling. Wipe the inside of
the dust container with a damp cloth.
3.
CAUTION! The filters must be completely dry before installation. Do not immerse the dust container in wa-
ter.
Recharge the battery after each use. Do not store the vacuum cleaner with the discharged
battery. Use the supplied battery charger only. Do not short the battery poles. Use the iden-
tical battery type for replacement.
4.
Regularly clean the rotary shaft of the electric brush. The shaft
can be detached after disengaging the lock in the bottom
part of the electric brush, indicated by an arrow in fig. 10. After
cleaning the shaft, insert it into the electric brush and engage
the lock.
CAUTION! Do not dispose of used batteries with household waste. Dispose of
batteries by returning them to an authorized waste collection point or the
original reseller. Never throw batteries into fire!
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
The vacuum cleaner fails to start.
Discharged battery. Recharge the battery.
Battery charging in progress. Wait until complete.
Low suction power.
Clogged wand and/or tool. Unclog.
Dust canister full. Empty the dust canister.
The vacuum cleaner blows out dust.
Clogged filters. Clean the filters.
The dust canister is poorly installed. Install the dust canister properly.
Fig. 10