6
MCDISK-E
High-Tech Made in Switzerland
2.1 SPECIFICATIONS
Performance:
Transfer rate
2.5 MByte/sec
Average throughput
with SRAM card
2.0 MByte/sec
Latency
0 ms
Interfaces:
SCSI standard
SCSI-2
SCSI bus connector
50-pin/male ribbon
SCSI bus configuration
8-bit/single-ended
PCMCIA standard
Release 2.1
PCMCIA card slots
2
PCMCIA card types
Type I - III
Power Requirements (without card):
+5 VDC (+/- 5%)
120 mA
+12 VDC (+/- 5%)
depends on card, min. 1mA
Operating Environment:
Temperature
0°C ... 70°C
Extended temp. (opt.)
-25°C ... +70°C
Relative humidity
(non-condensing)
10% ... 90%
2.1.1 PHYSICAL DIMENSIONS
Height
25.4 mm (1.0")
Width
101 mm (4.0")
Lenght
145 mm (5.75")
Front panel thickness
3.0 mm (0.12")
Weight
0.25 kg (0.55 lbs)
2. MCDISK-E-1 OPEN FRAME
2.2 ELECTROSTATIC DISCHARGE (ESD) PROTEC-
TION
Various electrical components within the read/write unit are
sensitive to static and electrostatic discharge (ESD). Even a
non-sensible static discharge can be sufficient to destroy or
degrade a component's operation.
Following the precautions listed below will avoid ESD-
related problems:
•
Use a properly installed antistatic pad on your work
surface.
•
Wear wrist straps and observe proper ESD grounding
techniques.
•
Leave the unit in its antistatic cover until you are prepared
to install it in the system. When it is out of its protective
cover, place the unit on the properly grounded antistatic
work surface pad.
Do not touch any components on the read/write unit.
Handle or touch only the unit chassis.
