Mpio MG 200, Руководство пользователя

Страница: 10 / 23

10
To switch between MTP and MSC modes
• While MG200 is plugged into your computer, press the Menu ( M ) button to
switch between the MTP and the MSC modes.
Note:
If you are using Windows98 SE and need to install the USB driver manually, please
refer to Microsoft Knowledge Base or to MPIO Web Support.
Disconnecting MG200
To disconnect MG200 from a PC
• Place mouse cursor on “Stop a Hardware Device” icon in the system tray, and click
right mouse button.
•
Select “Stop USB Mass Storage Device.” .
• Select USB Mass Storage Device from the list of hardware, and click the [Stop]
button.
•
When the “Stop a Hardware Device” window appears, select MPIO MG200 USB
Device.
•
Finally, click [OK] and disconnect the USB cable.
Windows XP :
Disconnect the USB cable when the “Safe to remove hardware” message appears.
Windows 2000:
Disconnect the USB cable by clicking the
[OK]
button after the “Safely Remove Hardware”
message appears.
Note:
Disconnecting MG00 without going through the above steps may result in loss of
data.