Mpio MG 200, Руководство пользователя

Страница: 11 / 23

10 11
To disconnect MG200 from a Mac
• Press COMMAND-E or select [Eject “MG200”] in the File menu in Finder. If you have a
mouse with two mouse buttons, right click on MG200 icon on the desktop and
choose [Eject “MG200”] .
• Wait until the MG200 icon disappears from the desktop.
• Remove MG200 from your Mac.
Note: Disconnecting MG00 without properly going through “Eject” process may result in
loss of data.
Using MG200
Basic Controls
To turn on MG200
• Press and hold ( ).
To turn off MG200
• Press and hold ( ).
Note: MG00 will automatically power off three minutes after it was put on pause by
default.
To change the volume
• Press (+) to raise or (-) to lower the volume. Hold either button to rapidly raise or
lower the volume.
To lock MG200 buttons
(in case you press them accidently)
• Set the Hold switch to Hold.
When the Hold switch is set to Hold, all MG00 controls will be disabled and the Lock ( )
icon will appear when you attempt to activate the device.