MPC Profile 6.5, Техническое справочное руководство

Страница: 28 / 68

CHAPTER 2: Upgrading Your Computer
24
5
Make sure the hard drive release lever is still fully extended, then slide the new hard drive
all the way into the hard drive bay by pushing on the hard drive itself (not the lever). Make
sure that you slide the drive in until it is flush with the edge of the hard drive bay.
6
Reconnect the cables to the drive.
7
Replace the back panel by following the instructions in “Replacing the back panel” on
page 17 .
8
Reconnect all external cables and the power cord.
9
Turn on your computer.
10
If you are using the new hard drive as your primary drive, install Windows using the operating
system DVD that came with your computer. For more information on restoring your system,
see “Recovering your system” on page 47 .
Adding or replacing an expansion card
You can install a half-height PCI card, a full-height PCI card, or a video card in your computer.
Installing a half-height expansion card
To install a half-heght expansion card:
1
Remove the back panel by following the instructions in “Opening the case” on page 16 .
2
Remove the PCI riser card assembly by pulling on its green handle.
Caution
Do not touch the contacts on the bottom part of the expansion card.
Touching the contacts can cause electrostatic damage to the card.