MPC Profile 6.5, Техническое справочное руководство

Страница: 26 / 68

CHAPTER 2: Upgrading Your Computer
22
6
Lay the computer face-down, then reconnect the cables to the drive.
7
Replace the back panel by following the instructions in “Replacing the back panel” on
page 17 .
Replacing the diskette drive
To replace the diskette (floppy) drive:
1
Remove the back panel by following the instructions in “Opening the case” on page 16 .
2
Remove the power supply by following the instructions in “Replacing the power supply” on
page 20 . You do not need to unplug the power supply from the system board.
3
Pull the diskette drive release latch out (toward you).
4
Slide the diskette drive out (toward you) until it stops, then unplug the cables from the drive.
5
Return your computer to its upright position, then slide the diskette drive out the front of
the computer.
6
Slide the new drive into the computer from the front until the front of the drive is flush with
the front of the computer, then slide the drive release lever forward (away from you) to lock
the drive into place.