MP Filtri UFM Series, Руководство по эксплуатации и обслуживанию

Страница: 36 / 136

6.3.3 Electrical connection of a single-phase motor
6.3.4 Electrical panel
Depending on its type, this motor is connected to the single-phase line in only one way:
- Motor with single-phase winding: Characteristic system for single-phase motors that have only a single winding, in which one
end must be connected to the phase and the other end to the neutral conductor. To change the direction of rotation of the motor,
reverse phase and neutral.
- Motor with two-phase winding: Two-phase winding that, as for a single-phase winding, functions with a permanently powered
capacitor. To change the direction of rotation, connect the terminals as shown in the circuit diagram.
The direction of rotation of the motor is determined
differently depending on the connection.
To change the direction of rotation of the motor, reverse
phase and neutral.
3-phase electrical panel Single-phase electrical panel
6.4 U
se
6.4.1 Installation
The mobile filtration unit must be positioned in a place that guarantees its stability during use.
TRANSFER
Connect/immerse the metal suction lance (IN) to the tank or to the drum, immerse the discharge hose (OUT) in the machine tank
or in the drum which should be transferred to.
If the transfer oil is to be cleaned, it is advisable to filter the oil contained in the drum or tank several times before being transferred.
In this case immerse the metal suction lances (IN) and the discharge lances (OUT) in the barrel or tank to be transferred to. Be
careful that the lances remain below the level of the oil to be transferred in order to avoid foaming and cavitation; space the ends
of the two lances in order to recirculate all the fluid and not generate an emulsion.
6.3.5 Electrical panel labels - not applicable for UFM041
Mobile filtration unit
34