MP Filtri UFM Series, Руководство по эксплуатации и обслуживанию

Страница: 25 / 136

UFM015
6.4.5 Shutdown
Once the operations have been completed, switch off the
electric pump by pressing the Off button "0" on the terminal
box of the electric motor (Fig. 2) and disconnect the electric
connection plug.
1
Fig.3
Put the lances in their respective housings anchored to
the frame (
!
- Fig. 3), paying attention to the fluid still present
in the hoses.
Rewind the power supply cable.
2
Fig.2
6.4.6 Operating limits and environmental limits
The trolley is designed to operate at a maximum pressure of 4 bar.
The electric motor is designed to operate according to the rating plate data.
For use in environments with very cold or very hot temperatures, refer to the technical data provided in Section 5.
6.5 Normal and scheduled maintenance
The UFM015 does not require particular maintenance interventions, it is however good practice to check the perfect condition of
the suction and discharge hoses before use. Check that the filter cartridge is screwed tight.
Periodically check the tightness of the hydraulic connections and if the electrical cable ends in the motor terminal box are tight.
Also check the cleanliness of the "Y" shaped filter for any accumulated macro impurities, so as to preserve the filter element (CS
100 or CS 150).
6.5.1 Oil leaks
Oil leaks can form on the joints of the hoses and on fittings if any connections or screws are loosened, in which case we recom-
mend checking the correct tightness.
If the operations described above are not able to solve the problem, contact the manufacturer.
CAUTION
!
With oil temperatures above 40/45° C, give special caution to the handling of the metal lances/tubes and movement of the trolley.
Avoid direct contact with hot oil, the mobile filtration unit and its installed components.
Mobile filtration unit
23