MP Filtri UFM Series, Руководство по эксплуатации и обслуживанию

Страница: 23 / 136

UFM015
6.3 Wiring diagram
6.4 U
se
6.4.1 Installation
The mobile filtration unit must be positioned in a place that guarantees its stability during use.
TRANSFER
Connect/immerse the metal suction lance (IN) to the tank or to the drum, immerse the discharge hose (OUT) in the machine tank
or in the drum which should be transferred to.
If the transfer oil is to be cleaned, it is advisable to filter the oil contained in the drum or tank several times before being transferred.
Be careful not to mix up the suction and discharge hoses. The suction hose (IN) is the one with the largest diameter.
6.3.1 Electrical connection
The mobile filtration unit must be connected to the power supply using the included plug; also check the following:
- the applicable laws and regulations at the location and at the time of installation
- that the power supply voltage and the frequency at the connection point are compatible with those indicated on the rating plate
of the mobile filtration unit
- the data shown on the rating plate.
The supply voltage must correspond to the voltage specified on the rating.
The construction features of the electric cable guarantee great flexibility, excellent resistance to weather conditions, oils and greases,
mechanical and thermal stresses: Standard IMQ-CPT-007, CEI EN 50525-2-21.
Compliant with requirements of the BT 2006/95/CE directives.
The terminal box contains metal elements that are under hazardous voltage;
after making the connections, always close the box cover.
NOTE
!
6.3.2 Triangular electrical connection of a three-phase motor - not applicable for UFM015
6.3.3 Electrical connection of a single-phase motor - not applicable for UFM015
6.3.4 Electrical panel - not applicable for UFM015
6.3.5 Electrical panel labels - not applicable for UFM015
Mobile filtration unit
21