LITESPEED RX
OWNERS MANUAL
12
Version 2
ASSEMBLY PROCEDURES
1.
Place the glider on the ground, zipper up. Open the bag, undo ties, remove A-frame
bottom padding and battens.
2.
Assembly the A-Frame.
Picture 6
Standard uprights and
base bar assembly.
Roll the glider over so that
it is standing on the
control frame.
3.
Roll the glider over so that it is standing on the control frame.
Picture 7
Roll the glider onto the
A-frame and attach the
front wire to the Bailey Block.
Take special care with the wires, the Litespeed RX features 1x19 cable which
can easily be kinked unless special care is taken.
NOTE
!
With standard uprights, the uprights will naturally toe-in as shown in
Picture 6. Hold the base bar and the upright, twisting the upright so the
connection lines up.
NOTE
!
Содержание Litespeed RX 3
