Moyer Diebel 201HT M4 Series, Руководство по установке и эксплуатации

Страница: 29 / 120

201HT - Installation
Detergent and Rinse-aid Pumps and Injection Points - 201HT
To adjust the amount of chemicals dispensed
by the pumps:
1. Make sure the chemical containers are full and
the pick-up tubes are in their proper containers.
3. Turn the dishwasher power switch ON.
The switch will illuminate and the dishwasher
will fill with water.
4. Run a normal dishwasher cycle and test
detergent and rinse-aid concentrations
according to the chemical supplier's
instructions.
CAUTION:
Excessive pressure to the potentiometers when
adjusting can result in bent or broken adjusting
screws.
5. Each dispensing pump has a clearly marked
adjustment screw. Turn the screw CW to
increase the run time of the dispensing pump
and CCW to reduce the run time.
To adjust the tank fill:
1. The fill adjustment screw will provide a
small change in the tank water level.
2. If a large adjustment is needed, check the
incoming water pressure and make sure the fill
hose is not kinked.
3. If the above items are okay then the size
of the incoming water supply should be
checked. The incoming water supply line must
be a minimum of 1/2" or larger.
Refer to the photo below:
Fill Adjustment
For 201HT
Use a 4mm
blade
screwdriver
Fill Adjustments
21