WDR-3124A
Web Console Configuration
3-31
The following table provides the field descriptions.
Field
Description
Default setting
Enable
Select
Enable
to activate SNMP agent.
Disable
Remote
management
Select
Enable
to allow remote management via SNMP agent.
Disable
Read community
Enter the community string or password (up to 31 characters
long) for an SMNP agent to access objects with read-only
permission.
public
Write community
Enter the community string or password (up to 31 characters
long) for an SMNP agent to access objects with read-write
permission.
private
SNMP agent
version
Select the SNMP protocol version used to manage the
WDR-3124A.
V1, V2c
Admin
authentication
type
Select
No Auth
to use an administrator account to access objects
without authentication.
Select
MD5
to authenticate using HMAC-MD5 algorithms where
the minimum requirement is to use an 8-character password.
Select
SHA
to authenticate using HMAC-SHA algorithms where
the minimum requirement is to use an 8-character password.
No Auth
Admin privacy type Select
Disable
for no data encryption.
Select
DES
to use DES-based data encryption.
Select
AES
to use AES-based data encryption.
Disable
Privacy key
Enter the key (up to 63 characters) for data encryption.
Private MIB
information Device
object ID
The object ID (OID) is the enterprise value for the WDR-3124A.
This value is not configurable.
Port Forwarding
You can configure port forwarding settings on the WDR-3124A to redirect specific packets from a remote host
on the WAN to a server on the LAN. This feature hides the IP address of the local server and prevents the
remote host from accessing a local server directly.
The WDR-3124A blocks unrecognized packets to protect your LAN network when computers connected to the
WDR-3124A are not visible on the WAN.
NOTE
You can make LAN computers accessible from the Internet by enabling Virtual Server.
You can also configure port forwarding on the WDR-3124A to redirect traffic to a specific port on a LAN
computer.
To access the
Port Forwarding
screen, click
Advanced Settings > Port Forwarding
.
