VPort 2141 Video Encoder User’s Manual
System Configuration
4-3
Automatically Restore DO state
There is a
Automatically restore DO state after seconds
setting below the Hostname,
which is used to restore the relay output’s status to the default once the relays are triggered. By
using this function, the administrator does not need to close the alarms trigged from the DOs
manually.
Date and Time
The default setting for Date and Time is
Keep current date and time
. You may also choose from
one of the following date and time configuration options:
1.
The easiest way to adjust the date and time is to make the VPort
Sync with computer time
.
2.
Select the
Manual
option if you wish to set the date and time manually by entering new
settings.
3.
Select the
Automatic
option to make the VPort synchronize automatically with timeservers
over the Internet every month. However, synchronization may fail if the assigned
NTP server
cannot be reached, or the VPort is connected to a local network. Leaving the
NTP server
blank will force the VPort to connect to default timeservers. Enter either the Domain name or
IP address format of the timeserver as long as the DNS server is available. Do not forget to set
the
Time zone
for local settings. Refer to Appendix G for your region’s time zone.
Click on
Save
to validate the changes.
