NPort 5000 Series User Manual
80
Web Interface for the Overall NPort 5000 Series
Parameter
Setting
Factory
Default
Description
Necessity
TCP Alive
Check Time
0 to 99 min
7 min
0 min:
TCP connection is not closed due to an
idle TCP connection.
1 to 99 min:
The NPort automatically closes the
TCP connection if there is no TCP activity for the
given time. After the connection is closed, the
starts listening for another TCP connection.
Optional
Local TCP Port
1 to 65535
4001
The TCP port that the NPort uses to listen to
connections, and that other devices must use to
contact the NPort. To avoid conflicts with well-
known TCP ports, the default is set to 4001.
Required
Packing length
0 to 1024
0
0: The Delimiter Process will be followed,
regardless of the length of the data packet.
Greater than 0: If the data length (in bytes)
matches the configured value, the data will be
forced out.
Optional
Delimiter 1
00 to FF
None
Once the NPort receives both delimiters through
its serial port, it immediately packs all data
currently in its buffer and sends it to the NPort’s
Ethernet port.
Optional
Delimiter 2
00 to FF
None
Optional
Delimiter
process
Do nothing,
Del 1,
Del 2,
Strip Delimiter
Do
nothing
[Del 1] or [Del 2]:
The data
will be transmitted when an additional byte (for
Del1), or an additional 2 bytes (for
Del2) of data is received after receiving
the Delimiter.
[Strip Delimiter]:
When the Delimiter is
received, the Delimiter is deleted (i.e.,
stripped), and the remaining data is
transmitted.
[Do nothing]:
The data will be transmitted
when the Delimiter is received.
Optional