Moxa MxNVR Industrial Video Recorder
System Configuration
5-35
NOTE
Once the Show alert on the image when VMD is triggered is enabled, the red frames that appear on the
homepage image indicate the size of the VMD window set up by the administrator.
Setup a VMD Alarm
Setting
Description
Default
Enable
Enable or disable the VMD1, 2, and 3
Disabled
Window
The name of each VMD window
Blank
Percent
The minimum percentage of an image change for triggering
VMD. Decrease the percentage to make it easier to trigger
VMD.
80
Sensitive
The measurable difference between two sequential images for
triggering VMD. Increase the sensitivity to make it easier for
VMD to be triggered.
1
NOTE
After setting the VMD Alarm, click the
Save
button to save the changes.
Trigger Conditions and Actions
Administrators can set triggers, such as Trigger Relay1 alarm, Send snapshot image via E-mail, Send snapshot
image via FTP, Send Message via HTTP Event servers, and Record video on HDD, for each VMD.
Setting
Description
Default
Trigger Relay1 alarm
Once this DI is triggered, the Relay1 alarm will be activated Disabled
Trigger Relay2 alarm
Once this DI is triggered, the Relay2 alarm will be activated
Disabled
Send snapshot image Once this VMD is triggered, the MxNVR-MO4 will send the
Disabled
