Moxa MxNVR Industrial Video Recorder
System Configuration
5-6
Stream 1: H.264
This video channel records stream 1: H.264 video stream
Stream 2: MJPEG
This video channel records stream 2: MJPEG video stream
NOTE
To change the video resolution, frame rate and video quality, please go to the
System Configuration
Video
Video performance
configuration page.
Record Schedule
Set up the video recording for
All the time
or
Schedule Record
behavior.
Setting
Description
Default
All the time
The video recording will be activated constantly when the
MxNVR-MO4 is powered on.
All the time
Schedule record
The video recording will be activated based on the schedule
setup.
Start time
The time the video recording is activated.
8:00
End time
The time the video recording is ended.
8:00
SUN
MON
TUE
WEN
THU
FRI
SAT
Select the weekday the video recording is activated.
Blank
FTP Server Daemon
Set up the FTP server for remotely downloading the recorded video clips.
Setting
Description
Default
Enable FTP Server
Daemon
Enable or disable the FTP server daemon for remote access
Disable
Server port
The access port of the FTP server
21
Mounting Failed
Sometimes there may be failure in mounting the HDD or SSD. If this occurs, the system needs to reboot to run
the mounting process again.
Setting
Description
Default
Reboot the system
once the mounting of
HDD is failed.
Enable a automatic system reboot if the HDD is mounted and
fails
Disable
Initialize HDD
Because the recording system structure of MxNVR-MO4 is proprietary, it is required to initialize a HDD or SDD
which is mounted in the MxNVR-MO4 for the first time, whether it is a new HDD or a used HDD. Click the
Start
button and wait for few seconds, and then the MxNVR-MO4 will start to run the format process. The HDD
initialization process is complete once the “
Format Finished……Rebooting
” message displays.
