ioLogik W5300
SMS Commands
B-3
Local I/O Commands:
SMS Command
Attribute
Note
AIEnable_CH
Read
AI channel is enabled or not
0=Off, 1=On
CH = Channel number, start index:00
AIValue_ CH
Read
AI Value
CH = Channel number, start index:00
AI_ CH
Read
Scaled AI value
CH = Channel number, start index:00 to 04
AIRange_ CH
Read
Current AI mode, +/-5V, 0-10V, +/-10V
、
0-20mA, or 4-20mA
CH = Channel number, start index:00
AIMin_CH
Read
Minimal AI Value
CH = Channel number, start index:00
AIMax_CH
Read
Maximal AI Value
CH = Channel number, start index:00
DIO_DIRECT_CH
Read
DIO Direction, DI or DO
CH = Channel number, start index:00
DIMode_CH
Read
DI Mode, DI or Counter
CH = Channel number, start index:00,
DIStatus_CH
Read
DI Status, ON or OFF
CH = Channel number, start index:00
DIFilter_CH
Read
DI Filter, unit: ms
CH = Channel number, start index:00,
DITrigger_CH
Read
DI Trigger, LtoH, or HtoL
CH = Channel number, start index:00
DICntStart_CH
Read
DO Counter is started or not, 0=OFF, 1=ON
CH = Channel number, start index:00
DICNT_CH
Read
DI Counts. CH = Channel number, start index:00
DOMode_CH
Read
DO Mode, DO or PWM(pulse output)
CH = Channel number, start index:00
DOStatus_CH
Read/Write DO Status, 0=OFF, 1=ON.
CH = Channel number, start index:00
DOLowWidth_CH
Read
DO Low Width, unit: ms
CH = Channel number, start index:00
DOHighWidth_CH
Read
DO High Width, unit: ms
CH = Channel number, start index:00
DOPulseStart_CH
Read/Write DO Pulse is started or not, 0=OFF, 1=ON
CH = Channel number, start index:00
DOTotalRelayCNT_CH
Read
Relay Total Counts
CH = Channel number, start index:00
DOCurrentRelayCNT_CH Read
Relay Current Counts.
CH = Channel number, start index:00
Example:
1.
Query the 1st DI the ioLogik W5300 system:
#GetSMS?DIStatus_00=?#
2.
Configure the 2nd relay output(DO_09) of the ioLogik W5340 to On:
#SetSMS?DOStatus_09=1#
Содержание ioLogik W5300 Series
Страница 106: ...ioLogik W5300 Planning and Assistance 5 13 ...