ioLogik W5300
Planning and Assistance
5-11
Setup Procedure:
Step 1:
Open ioAdmin and set up your ioLogik W5300 as follows:
•
Connect DO-4 to DI-0.
•
1.2. Configure DO-4 for 1 Hz pulse output.
•
1.3. Configure DI-0 for counter input mode.
Step 2:
We assume that DI-0 is already connected to the flow meter.
Step 3:
Right click on DI-0 from the
I/O
Configuration
panel.
Step 4:
Select the
Counter Scaling
tab in the popup
window.
Step 5:
Configure the scaling formula and update the
sampling time.
Step 6:
Close the popup window.
Step 7:
Choose virtual channel (shown as VC-00),
and select the source channel. We use DI-00 for this
example.
Step 8:
Select the operation mode from Max, Min.,
Average, Accumulation, Instantaneous, and
Incremental.
Step 9:
Close the popup window.
Step 10:
Check the value on the I/O configuration
Panel. The virtual channel value can be updated to
AOPC with the Active Tags function.
Record your I/O Data in the Data Log File
Scenario:
A cellular communication system has lost its connection unexpectedly. If the user stores data in a
PC database, the database may lose data when the cellular network is disconnected. For this reason, the
ioLogik W5300 provides a front-end data logging function with its own built-in SD slot for storing the I/O data.
The data file can be uploaded to the host PC via the FTP protocol and Click&Go logic. By using the SD card
solution, users can avoid the “missing data” problem that plagues traditional solutions.
Log Profile Creation
Step 1:
Insert a 2 GB or smaller SD card into the SD slot, and insert a SIM card.
Step 2:
Start ioAdmin in administrator mode. Configure the Cellular Settings first.
Step 3:
Go to the Click&Go tab and click on the Data logging icon on the Global Variable Toolbar.
Содержание ioLogik W5300 Series
Страница 106: ...ioLogik W5300 Planning and Assistance 5 13 ...