ioLogik R2140
Using ioAdmin
3-14
Server Context Menu
The server context menu is accessed by right clicking on the server model name in the navigation panel.
Connect
Select this command to have ioAdmin attempt a re-connection over the network to the selected ioLogik server.
Disconnect
Select this command to have ioAdmin drop the network connection with the selected ioLogik server.
Delete I/O Server
Select this command to have ioAdmin remove the selected server.
Add Serial I/O Server
Select this command to manually add a server by using its Unit ID. This function is used when cascading
multiple I/O servers over RS-485.
Restart System
Select this command to restart the ioLogik from a remote site. You will need to log in as an administrator to use
this function.
Reset to Default
Select this command to reset all settings, including console password, to factory default values. You will need
to log in as an administrator to use this function.
Export System Config
Select this command to export the configuration of the ioLogik to a text file. You will need to log in as an
administrator to use this function. It is strongly recommended you use this method to back up your
configuration after you have finished configuring the ioLogik for your application.
