ioLogik R2140
Using ioAdmin
3-11
I/O Configuration Tab (Administrator)
When logged on as an administrator, you may double click a channel in the I/O Configuration tab to
configure that channel’s settings.
Configuring Analog Input Channels
The R2140 is equipped with 8 AI (analog input) channels that can be set individually to +/-150 mV, +/-500 mV,
+/-5V, +/-10V, 0-20 mA, and 4-20 mA.
Configuring Analog Output Channels
The ioLogik R2140 is equipped with 2 AO (analog output) channels that can be set individually to 0 to 10V, 4
to 20 mA.
Power On Settings: Use this field to set the initial status for the AO channel when the ioLogik is powered on.
Safe Status Settings: Use this field to specify how the AO channel responds to a break in network
communication. When the network connection is lost as specified in the Host Connection Watchdog, the ioLogik
R2140 will reset all channels according to their Safe Status settings. Note that the Host Connection Watchdog
is disabled by default, and must be enabled for Safe Status settings to have effect.
Test I/O: You can test the AO channel in the Test tab.
