Moxa Technologies INJ-24A Series, Руководство по установке оборудования

Страница: 9 / 10

- 9 -
Smart PoE LED Indicators
Two SmartPoE LEDs indicate the current status between PSE and PD and
the power output mode of the INJ-24A. The following table shows the
details about these SmartPoE LEDs.
LED Color State Description
P1, P2 Amber
ON
Power is being supplied to power input P1
/P2
OFF
Power is not being supplied to power input
P1 / P2
802.3af/at
(SmartPoE) Green ON 802.3at connection
Blinking PoE current overloading
OFF
No PoE power output
Amber
ON 802.3af connection
Blinking PoE current overloading
OFF
No PoE power output
4-pair
mode
Green
ON 4-pair mode PoE power output
OFF 2-pair mode PoE power output
Note: If INJ-24A is in 4-pair mode but with a 2-pair mode PD, the
802.3af/at LED will always be green.
Specifications
Technology
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3af, 802.3at
Interface
RJ45 Ports 10/100/1000BaseT(X) speed
LED Indicators P1, P2, 802.3af/at, 4-pair mode
Power
Input Voltage 24/48 VDC (21.6 to 57 VDC)
Input Current Max. 3.72 A @ 24 VDC (in 4-pair maximum
output state)
Connection Removable 4-contact terminal block
Overload Current
Protection 5 A
Reverse Polarity
Protection Present
PoE Port
Maximum Power Output
Standard mode:
802.3af: 15.4 watts
802.3af/at: 30 watts
High-power mode: 36 watts
4-pair mode: 60 watts
Surge Resistance 3 KV
Connection Type
Mode A (power on pins 1, 2, 3, and 6) and Mode
B (power on pins 4, 5,7, and 8) selectable by
DIP switch
Mechanical
Housing IP30 protection, plastic case
Dimensions 115 × 30.3 × 78.8 mm (H x W x D)
Weight 245 g
Installation DIN-Rail, wall mounting