Moxa Technologies INJ-24A Series, Руководство по установке оборудования

Страница: 3 / 10

- 3 -
WARNING
Safety First!
Be sure to disconnect the power cord before installing and/or
wiring your Moxa PoE injector. Calculate the maximum possible
current in each power wire and common wire. Observe all
electrical codes dictating the maximum current allowable for each
wire size. If the current goes above the maximum ratings, the
wiring could overheat, causing serious damage to your
equipment.
You should also pay attention to the following items:
• Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
• NOTE: Do not run signal or communications wiring and power wiring
in the same wire conduit. To avoid interference, wires with different
signal characteristics should be routed separately.
• You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.
• Keep input wiring and output wiring separated.
• It is strongly advised that you label wiring to all devices in the system
when necessary.
Package Checklist
The Moxa INJ-24A Series is shipped with the following items. If any of
these items is missing or damaged, contact a Moxa customer service
representative for assistance.
• Moxa INJ-24A High-Power PoE+ Injector
• Hardware Installation Guide
• Moxa Product Warranty Statement
Features
High Performance Technology
• 10/100/1000BaseT(X)
• Provides up to 36 watts (2-pair mode) or 60 watts (4-pair mode) per
PoE port
• Built-in 24/48 VDC booster for PoE and PoE+
Innovative Easy Installation
• Selectable PoE Mode A and Mode B connection options
• SmartPoE LED indication