Moxa Technologies Industio C114HI, Руководство пользователя

Страница: 57 / 60

~
51
~
Appendix C Troubleshooting
1. Board not found.
a. The software base addresses do not match with the hardware ones.
b. The base I/O addresses selected conflict with other devices. Avoid it and
refer to Appendix E.
c. The board is not properly plugged in the system. Reinstall it.
d. The board is defective. Return it for repair.
2. Board found but can not transfer data .
a. Wrong cable wiring. Correct it.
b. Wrong IRQ setting or conflict. Change it.
3. Why the DOS utility IO-IRQ can not access C114HI to configure?
There are several reasons that may lead to this trouble:
a. The user forgot or does not know the Configuration Access Port (CAP) of the
board. Refer to the next question and answer.
b. The CAP of the board conflicts with other add-on board's I/O address. Please
change one of them.
c. The board is not plugged in a right or good slot. Please plug the board in a
good 16-bit ISA slot.
d. The board may malfunction. Please return for repair.
4. What to do if user forget or does not know the Configuration Access Port
(CAP) of the board?
Steps to recall CAP :
ú
Power off the PC.
ú
Install jumper cap onto the JP1 of the board.
ú
Power on the PC. Now the CAP address of the board is forced to 0xA700.
ú
Execute IO-IRQ under DOS.