Moxa Technologies Industio C114HI, Руководство пользователя

Страница: 23 / 60

Chapter 4
l l
For Windows NT Users
17
and subsequent ports are mapped to continuous COM numbers. For instance, if
the first port is mapped to COM10, then the second port is mapped to COM11
sequentially. For receive FIFO trigger level (bytes), every port will have the
same trigger level as set. For 16550-compatible type of UART, receive FIFO
trigger level is 1, 4, 8 or 14 bytes. The default is 14 bytes.
Non-sequential Port Mapping: For I/O Address, set the I/O address of each
port independently. For COM number, set the COM number of each port
independently. For receive FIFO trigger level (bytes), set the trigger level of
each port independently. For 16550-compatible type of UART, receive FIFO
trigger level is 1, 4, 8 or 14 bytes. The default is 14 bytes.
At most 4 boards of C114HI can be installed together as long as the IRQ and I/O
address resources are sufficient and available in a system.
3. Unless the system restarted, the latest configuration will not take effect.
4.3 Board Initialization Status Checking
There are two alternative ways to find out if ports of the board are initialized
successfully:
1. Enter [Control Panel] group and then [Ports] icon, to check the port list and see
if all configured ports are already added in the system correctly.
If no configured port shown in the port list, refer to Section " Troubleshooting " for
solutions.
2. Enter [Administrative] group, then [Event Viewer] icon, and then [System
Event Log] to check for message like "COM10 (C104 port 4) O.K." for each
configured port.
If message is "Can not find the configured C102/C104/C168
(CAP=0xXXXX) !", refer to Section " Troubleshooting " for solutions.
4.4 Driver Upgrade/Removal