Installing EDS-405
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of EDS-405 when you take it out of the box. If you need to reattach the
DIN-Rail attachment plate to EDS-405, make sure the stiff metal spring is
situated towards the top, as shown in the figures below.
1.
Insert the top of the DIN-Rail into the slot just below the stiff metal spring.
metal
spring
DIN-Rail
2.
The DIN-Rail attachment unit will snap into place as shown below.
metal
spring
DIN-Rail
3.
To remove EDS-405 from the DIN-Rail, simply reverse Steps 1 and 2
above.
2-3
