Depth regulator rod
Serves a dual purpose. It regulates the tilling depth
and helps the operator control the direction and
speed of the tiller.
Unfold the wheels bracket to raise the wheels to
one of the high positions. Set the depth regulator
rod with curve down to the rear of the unit.
1. Remove the cotter pin.
Raise or lower the depth regulator rod.
2.
Align groove in depth regulator rod with the
holes in bracket lock block and replace the cotter
pin.
3.
Lowering the depth regulator rod will slow the
tiller and make it till deeper. Raising the depth
regulator rod will allow it to move faster and till
more shallow.
To adjust the tilling depth.
For heavy soil (100mm / 4” depth or greater),
remove the depth regulator rod and work the tines
down with a back and forth motion to at least a
depth of 100mm (4”). Slowly pull the tiller backward
allowing the soil to feed forward over the tines.
Do not adjust tilling depth unless tine
clutch control lever is released to the
neutral position.
Besides obtained from the wheels bracket
adjustment, the depth regulator rod can be
adjusted through its grooves.
11
Mowerland Tiller
