INSTALL SD CARD & FORMATTING
OPEN CAMERA HOUSING AND LOCATE SD CARD SLOT.
Locate SD card slot on side of camera and insert SD card. Make sure
to format the SD card in the camera to ensure proper operation.
See Step 4 in the The Quick Start Guide (D2) for formatting instructions.
IMPORTANT SD CARD INFORMATION
• We recommend that you use a 32GB or smaller Class 10 SD card.
• Do NOT use micro SD cards, SDXC or cards designated as "turbo",
"ultra", or "super speed", as the speed required by these cards to
operate may cause instability in the cameras.
• We recommend that you have one dedicated SD card for each camera.
• Avoid swapping SD cards between cameras or other digital devices.
• Always format your SD card in the camera before each use.
FORMAT SD CARD
Power camera on by press and holding ON/OFF button for about 5 seconds
until LEDs illuminate. Please follow the steps below:
1. Press and hold the FORMAT SD CARD button until the SD CARD LED
blinks yellow.
2. Once the card is formatted, the SD CARD LED will turn solid green
indicating success.
3. If the SD card LED turns solid red, the SD card was not formatted.
Repeat the process until SD card LED is solid green. If the SD card LED
does not turn green, try another card.
NOTE:
You must format the SD card each time a card is inserted using the above steps.
FORMAT SD CARD VIA APP/WEBSITE
After you've completed the initial setup steps above, you will then have the
option to format your SD card from the Moultrie Mobile app or website under
your Camera Settings. When you elect to format your SD card from the app
or website, it will format the next time the camera checks in with Moultrie Mobile.
D5
THIS
CONTROL PANEL
IS LOCATED
INSIDE CAMERA
LATCH.
