QUICK-START GUIDE
- ESSENTIAL STEPS
ACTIVATE CAMERA & SELECT PLAN VIA APP OR WEBSITE
C
reate/
lo
g in to your Mo
ul
trie Mobi
l
e account through
app
or
MoultrieMobile.com.
Cl
ick
My Account > Activate Device
and
fo
ll
o
w
the instructions to
choose your plan and activate your camera.
STEP 1
ATTACH ANTENNA, INSTALL BATTERIES & SD CARD
Once the device is activated, attach the antenna and install 12 new
AA batteries and a
Class 10 SD card
.
STEP 2
POWER ON CAMERA
Press and hold ON/OFF button for about 5 seconds until LEDs illuminate.
There will be a 15 second delay to allow time for the SD card to format.
Then,the camera will connect to Moultrie Mobile and LEDs will indicate
camera status.
NOTE:
FORMATTING YOUR SD CARD IS RECOMMENDED BUT CAN BE SKIPPED
BY PRESSING
CONNECT/STATUS BUTTON
.
STEP 3
FORMAT SD CARD
NOTE:
THIS WILL
PERMANENTLY ERASE ALL CONTENT
ON SD CARD
.
During the 15 second delay after powing on the camera,
press and hold
FORMAT SD button
untile the
SD CARD LED blinks yellow
. LED will turn
green once process is complete.
STEP 4
CAPTURE A TEST IMAGE
Press and hold the
CONNECT/STATUS button for at least 5 seconds
.
Status LEDs will remain lit during image transmission. Refresh app/website
to confirm image receipt.
STEP 5
AIM MODE
Use built-in AIM MODE to assist with camera positioning. Simply press and
hold FORMAT SD button and CONNECT/STATUS button simultaneously
to activate. Red LED on front of camera will glow if movement is detected
within field of view. (Camera will return to normal operation with inactivity.)
IMPORTANT
You should see a light sequence start after the 15 second delay
and/or SD Card Format is complete.
Lights indicate camera status
and server connection.
Do you see any yellow or red lights?
If so, use the chart located
in section
D6
to identify status.
D2
