Motus M660BR, Руководство по обслуживанию

Страница: 19 / 96

18
13) Install the IDLER BRACKET (7) and IDLER
BRACKET BUSH (13) onto the new GENERATOR by
screwing three bolts (14).
Note: Make sure the IDLER BRACKET (7) moves (or
rotates) a little on the pulley as shown.
14) Install new GENERATOR in reverse order.
15) re-assemble the TENSION SPRING(15),
TENSION BOLT(16) and HEX NUT(17).
16) Install the Drive Belt (46) while referring to section
2.2 How to Replace the Drive Belt.
17) Adjust the tension of the Drive Belt
while referring to section 2. 1 How to
Adjust the Drive Belt (or POLY V-
BELT) Tension.
18) The re-assembled new
GENERATOR is shown.
19) Re-assemble all of parts in
reverse order.
2.4.2 M660BR/BRL
Do the steps below while referring to the following Exploded Views in Appendix.
I.1 M660BR/BRL_MAIN BODY
1) Turn off the unit power at the switch and then unplug the line cord at wall outlet.
2) Remove the CENTER FOOT_RE (59) by removing two bolts (56) securing the CENTER
FOOT_RE (59) to the Main Body Frame.
3) Remove two bolts (50) securing the FRONT BODY CAP_FRONT/REAR (58, 57) to the Main
Body Frame and remove the FRONT BODY CAP_FRONT/REAR (58, 57).
4) Remove six bolts (46, 56) fastening the FRONT BODY_R (54) to the Body Frame and
remove the FRONT BODY_R (54) from the Body Frame.
5) Replace the GENERATOR while referring to 6) thru 18) in section 2.4.1 M660BU/BUL .
6) Re-assemble all of parts in reverse order.