Motrona touchMATRIX MX350, Руководство по эксплуатации

Страница: 50 / 72

Mx350_01a_oi_e.docx / Nov-19 page 50 / 72
Command Menu
INPUT 1 ACTION
(function Input 1)
This parameter defines the function of the input “Ctrl. In 1”.
0 NO No function
1 RESET/SET A+B
Reset / set the counter reading of channel A and. B to the value set in
"SET VALUE". (d) (s)
2 FREEZE Freeze actual display value
(s)
3 KEY LOCK disable touch screen
(s)
4 LOCK RELEASE Loosen locking of all outputs / relay
(d)
5 RESET MIN/MAX Reset of the min. / max. values
(d) (s)
6 SERIAL PRINT Sending of serial data, see parameter SERIAL VALUE
(d)
7 TEACH PRESEL. 1
Current display value is stored as PRESELECTION 1 (reference source
is the one-line display) (d)
8 TEACH PRESEL. 2
Current display value is stored as PRESELECTION 2 (reference source
is the one-line display) (d)
9 TEACH PRESEL. 3
Current display value is stored as PRESELECTION 3 (reference source
is the one-line display) (d)
10 TEACH PRESEL. 4
Current display value is stored as PRESELECTION 4 (reference source
is the one-line display) (d)
11 SCROLL DISPLAY Display switching (see display in operation mode)
(d)
12 CLEAR LOOP TIME N.A.
13 START PRESELECT N.A.
14 ACTIVATE N.A.
15 STORE DATA N.A.
16 TESTPROGRAM N.A.
17 SET RED COLOR
The display lights up red. The color can be changed by the event-
dependent color switching in the PRESELECTION 1... 4 (d)
18 SET GREEN COLOR
The display lights up green. The color can be changed by the event-
dependent color switching in the PRESELECTION 1... 4 (d)
19 SET YELLOW COLOR
The display lights up yellow The color can be changed by the event-
dependent color switching in the PRESELECTION 1... 4 (d)
20 RESET/SET A
Reset /set the value of counter from channel A to the set value in
"Counter A Settings – SET VALUE” (d) (s)
21 RESET/SET B
Reset /set the value of counter from channel B to the set value in
"Counter B Settings – SET VALUE” (d) (s)
22 SET SECOND A
Reset / set of the batch counter / total counter from channel A to the
set value in “Counter A Settings – SECOND SET VALUE“ (d) (s)
23 SET SECOND B
Reset / set of the batch counter / total counter from channel B to the
set value in “Counter B Settings – SECOND SET VALUE“ (d) (s)
24 INC. BATCH A
Increase the batch counter of channel A (d)
25 DEC. BATCH A
Decrease of the batch counter of channel A (d)
26 INC. BATCH B
Increase the batch counter of channel B (d)
27 DEC. BATCH B
Decrease of the batch counter of channel B (d)
28 INC. BRIGHTNESS Display brightness is increased
(d) (s)
29 DEC. BRIGHTNESS Display brightness is reduced
(d) (s)