CT70104B_e.doc / Nov-15
Page 13 / 29
4.3.
Parameter Blocks
This field contains more parameters and machine specifications, separated to clearly arranged
blocks.
4.3.1.
Circs/ Pulses
This block defines the mechanical dimensions and associated ppr numbers of the encoders.
Circ1
Circumference of the measuring wheel or the feed roll of the material line
(Master) Scaling: Length units
PPR1
Number of incremental encoder pulses with one revolution of the
measuring wheel, with consideration of the selected quadrature edge
count (x1, x2, x4)
Inner Circ2
Inner active circumference of the rotating knife in length units
(= 2
π
x ri , see section 2.)
Outer Circ2
Outer active circumference of the rotating knife in length units
(= 2
π
x ro , see section 2.)
PPR2
Number of incremental encoder pulses with one revolution of the rotating
cutter roll, with consideration of the selected quadrature edge count (x1,
x2, x4)
+/-xx.x% Outer
Fine tuning of the profile shape during penetration of the tool, referring to
the radius of the outer circle ro. Normal setting 00.0
+/-xx.x% Inner
Fine tuning of the profile shape during penetration of the tool, referring to
the radius of the inner circle ri. Normal setting 00.0
