STORAGE
Storage for long periods of time requires of certain items
to avoid damaging the
Mini Bike
. To store you must:
1.Drain the oil from the engine.
2.Drain the gasoline from the fuel tank.
3.Place the fuel valve in the “OFF” position
4. Thoroughly clean the
Mini Bike
5.Remove the spark plug. See Spark Plug Cleaning page 20.
6.Put 15-20ml of oil into the spark plug gap.
7.Pull the starter rope several times to get out excess oil.
8.Put the spark plug.
9.Keep the
Mini Bike
in a cool and dry place. Do not expose
it to the sun.
10.Place a protective cover over the
Mini Bike
.
To use the
Mini Bike
after a long period of storage must:
1.Clean the
Mini Bike
.
2.Add engine oil.
3.Add gasoline. See Adding Gasoline page 18.
4.Set the fuel valve to the "ON" position.
5.Check tire pressure. See page 22.
NOTE:
When you use your
Mini Bike
again, at the time of lighting
it, smoke will come out of the exhaust until all the oil that
is placed in the spark plug space is burned.
ATTENTION:
Before driving your Mini Bike, you must make sure that it's
found in good condition, for them we recommend try it in
a safe place.
MOTOTEC
If your mini bike has any problems, please contact us.
Do Not Return to the Store
.
www.mototecusa.com
RE-USE
