PERIODIC REVIEWS
Note
：
Regularly check the oil level, in the event of a leak or the
oil level not adequate, present your
Mini Bike
to the nearest
MotoTec
Authorized Service Center.
Note
：
Never exceed the upper oil level, it may cause damage to
the motor.
Attention
：
When you use your
Mini Bike
under conditions of a lot dust,
you should change the engine oil immediately.
The engine oil should be changed at the service maintenance
(See Maintenance Services page 23).
To change the motor you must:
1.Place the Mini Bike on a horizontal surface.
2. Make sure the engine is hot and / or warm so that the oil
drains completely.
3.Locate the oil plug in the lower part of the body of
the
Mini Bike
engine.
4.Loosen the clock hands in the opposite direction and
remove it.
5.Remove the drain bolt from the bottom of the engine
body, see image 9.
6. Drain the oil into a container for 5 minutes.
7. Install the drain screw and turn it clockwise and apply
a torque of 24N-m (18lbs.ft].
8.Put 500ml of oil SAE10W-30.
9.Replace the oil plug and turn it in the clockwise
direction.
10.Turn on the motor for a period of 1-3 minutes.
11. Turn off the engine.
12 Check if the oil level is adequate.
Image 8.Circuter bayonet plug.
Image 9.Drain screw location.
Note
：
To avoid injury to a person and / or damage to the
Mini Bike
we recommend that you go to an Authorized
MotoTec
Service Center to have the oil change done.
Ecological note
：
Burned oil is a toxic waste, collect the oil in a waste
container and dispose of it at a used oil collection center.
DO NOT DRAIN.
If your mini bike has any problems, please contact us.
Do Not Return to the Store.
www.mototecusa.com
MOTOTEC
