6
400
300
240
40
PREPARING AND FIXING THE ANCHORING PLATE
•
Prepare a cavity at a distance (see set-
tings) from the end of the gate. Prepare the
power sheath tubings and accessories in
the raceway, in the same way as for the
raceway and cavities.
Tubings
Cavity
Raceway
•
Prepare a mold box that is larger than
the anchoring bracket and insert it into the
cavity.
•
The mold box must emerge 50 mm above
ground level.
•
Insert an iron grating to reinforce the ce-
ment and consolidate the anchoring
bracket.
Mold box
Griglia di ferro
•
Prepare the anchoring bracket, insert the
screws to secure the unit, tightening them
with the nuts provided, as in the figure.
•
Extract the plate’s pre-formed clamps with
a screwdriver or gripper as in the figure.
Nuts
Screws
Anchoring
bracket
a)
b)
c)
Iron grating
Washers
mm
m
m
50 m
Clambs
